Waterhog Classic Tile

210

or
Add to Wishlist

Your wishlist has been temporarily saved. Please Log in to save it permanently.

Features:

  • WaterHog Tiles are designed to provide scalable flooring solutions for large areas.

    • Clean & Dry - Bi-level surface effectively scrapes dirt and moisture from shoes, trapping it beneath shoe level to prevent tracking
    • Durable - Reinforced rubber nubs prevent pile from crushing and extend the performance life of the mat
    • Fade & Stain-Resistant - Solution-dyed fabric (24 ounces/yard2) is resistant to staining, dries quickly, and will not fade or rot
    • Safe -Certified high-traction by the National Floor Safety Institute (NFSI)
    • Available in 4 colors with choice of 4 patterns: classic waffle, diamond, diagonal, or geometric
    • Ideal for surface or recessed installations
    • Available with choice of 100-mil (1/4") or 200-mil (7/16") SBR cleated rubber backing
    • Tiles can be installed inside or outside; solvent-free adhesive is required for installation (sold separately)
    • Worn or damaged tiles can be easily replaced
    • Vinyl nosing available for border (sold separately)
    • Aquamarine Bluestone Bordeaux Charcoal Dk Brown
      Evergreen Gold Lt Green Med Blue Med Brown
      Med Grey Navy Orange Purple Red
      Red/Black
    • All products are shipped via UPS unless otherwise requested. At checkout you can request expedited shipping, which means the product will be expedited AFTER production. If you need your mat by a specific date we are more than happy to attempt to expedite the production time.
      • Packaging: Most of our mats are shipped in a box for maximum protection during shipment. We recommend that you open all coir mats outdoors as there are usually a lot of loose fibers during the production process.
      • Quality Control: All our mats are inspected prior to shipping to eliminate and defects or personalization errors.
      • Packing slip notes: You can add a note to your pack slip during checkout. Although we try our hardest to transfer the notes on all the mats that are shipped occasionally they are missed, so it cannot be guaranteed.
    • SPECIFICATIONS
      SURFACE
      Fiber: Solution-dyed polypropylene
      Weight: 24 ounces/yard2
      Construction: Needle-punched
      Design: Waffle, Diamond, Diagonal, or Geometric

      BACKING
      Material: SBR rubber - universal cleated
      Thickness: 100-mil or 200-mil 

      OVERALL TILE THICKNESS
      100-mil tiles: 1/4 inch (0.2500")
      200-mil tiles: 7/16 inch (0.4375")

      STANDARDS & TESTING

      • Certified high-traction by the National Floor Safety Institute (NFSI)
      • Passes DOC-FF1-70 for the surface flammability of carpets
    • Determine the Number of Tiles You Will Need
    • Measure the length and width of the area of carpet.
    • Multiply the width by the length to get the square footage of the space.
    • For areas that are not rectangular, break the area into smaller rectangles. Multiply the width by the length for each small rectangle, then add up all results to calculate the overall square footage.
    • Prepare for Installation

      • Remove any old floor coverings, debris, and adhesive from the floor.
      • Clean the entire floor surface of any dust, drywall mud, etc.
      • Once the floor has been cleaned, allow it to dry completely.
      • Allow the tiles to sit in the area uninstalled for several hours so they can acclimate to room temperature prior to installation.

      Layout Your Grid

      • Determine the center of the area by snapping chalk lines between the midpoints of the areas opposing sides.
      • Measure from the center point (the point at which two chalk lines converge) up to three feet and make a mark.
      • Now measure from the center point to the left four feet and make another mark. If the distance between these two marks is five feet, then your reference lines are perfectly square.

      Install the Tiles

      • Apply your adhesive to the prepared flooring according to the adhesive manufacturer's directions. We recommend CA024 multi-purpose solvent-free adhesive for both indoor and outdoor installations. Never us an adhesive that contains solvents.
      • Starting with one quadrant, install a row of full tiles along both reference lines.
      • First, apply the adhesive using a paint roller.
      • Next, place the tiles along the reference lines, applying firm pressure with the palm of your hand to ensure good contact with the adhesive. Tiles should be placed snug against the adjacent tiles, and their edges accurately aligned with one another.
      • Continue by placing tiles row by row, using the stair step method, always starting at the center and moving toward the side.

      Trim/Fit the Perimeter Tiles
      After you have placed all the full tiles, the perimeter tiles must be accurately marked and cut to fit snug against the side.

      • Start by placing the tile to be cut directly on top of the last tile in a row.
      • Next, position another tile against the wall and on top of the tile to be cut.
      • Make a mark on each side where the outer corners of the top tile overlap the tile to be cut.
      • Remove the tiles, and using a sharp utility knife and a straight edge, cut through the back of the perimeter tile between the two marks.
      • Use this same procedure to cut and fit the rest of the perimeter tiles.

    Type: Commercial



    Previous

    Related Items


    x

    Welcome to Loyalty Points

    Earn points with each order. Redeem accumulated points for merchandise. The more you purchase the more points you earn. You automatically migrate from Bronze, to Silver, to Gold and earn even more points along the way. Loyalty Points just one more reason to shop in our store.

    Earning and redeeming Rewards Points

    $1
    Earns you
    0.5
    $1
    Redeems to
    100.00

    Ways you can earn

    • Product Purchase

    Learn more about our program