Carpeted Logomats

CREATE A NEW PROOF OF THIS TYPE OF MAT? CLICK HERE Top selling all purpose logo mat. Clear sharp detail to showcase your logo in a full color palette 100% nitrile rubber edge and back that won't curl or crack Produced within 3-5 days of order Great for high traffic indoor/protected outdoor use

SURFACE
Material: PET (polyethylene terephthalate) printed/disperse-dyed yarn - contains 100% recycled content reclaimed from plastic
Weight: 23 ounces/yard2
Construction: Cut pile
Substrate: Freudenberg LUTRADUR® polyester spunbond non-woven fabric 3.8 oz. per square yard (130 grams per square meter)

BACKING
Material: Rubber (with 20% recycled content) - smooth or universal cleated
Thickness: 48-mil (body thickness 48-mil; border thickness 90-mil)

OVERALL MAT THICKNESS: 3/8 inch (0.375\)

STANDARDS & TESTING
Certified high-traction by the National Floor Safety Institute (NFSI)
Passes flammability standard DOC FF1-70
ESD rating of anti-static

For the best results, utilize the following cleaning method to clean your DigiPrint HD mat:

Vacuum regularly (daily in high-traffic commercial areas; weekly in lower traffic areas).
Extract or hose off as needed to remove heavy soil and debris.
Hang mat to dry.
Always make sure the mat is dry before placing it back in service.

DigiPrint HD mats that are backed with nitrile rubber can be commercially laundered. Proper laundering will prolong the life of the mat by preventing the buildup of soil and soap residue. DigiPrint HD mats are manufactured using PET Yarn. PET is a type of polyester that needs to be processed using the proper chemistry to obtain optimal results. When PET products are exposed to oils, the yarn has an affinity to retain these oils. We would recommend starting with 2 oz. of detergent per cwt., and 1 oz. of alkali per cwt, and add 4-oz. of hydrogen peroxide. The level of chemicals required will depend on the type of accounts you service. Please consult with your chemical supplier if you have additional questions or concerns.

Flush 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
Flush (optional) 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
Break 5-10 minutes, high water level, 120 degrees F (49 degrees C)
Rinse 2 minutes, high water level, cold
Rinse 2 minutes, high water level, cold
Extract (low speed) 1-2 minutes
Shake out (rotate wheel at wash speed with drain open) 1 minute
Extract (high speed max - 250 Gs) 3-5 minutes
Dry 5-10 minutes, 180 degrees F (82 degrees C) basket temp.
Cool down 5 minutes
Lay mats flat following removal from washer or dryer. Allow to cool before rolling.
For heavy soil mats, increase temperature to max 140 degrees F (60 degrees C). Break should not exceed pH of 9.5; use low pH non-ionic detergents. Do not over-dry mats; basket temperature of dryer should not exceed 180 degrees F (82 degrees C). If mats are not dried, final rinse can be increased to 140 degrees F (60 degrees C). This will reduce moisture retention following extraction.