Rubber Scraper mats feature a custom logo or artwork on a Rubber Scrape mat. Multi-colored images are printed on vinyl and heat pressed into a nitrile rubber surface.

CONSTRUCTION
Material: Rubber
Logo/Image Material: Polymeric film
Thickness: 3/16 inch (0.1875)

STANDARDS & TESTING
Certified high-traction by the National Floor Safety Institute (NFSI)
Passes DOC-FF1-70 for surface flammability
ASTM C1028-96 static coefficient of friction:
Dry 0.86
Wet 0.72

A digital print on polymetric film allows customers to customize the Rubber Scraper mat with logos, images, and messages.
Minimum Text Height: 1/2 (includes lowercase text)
Minimum Line Thickness: 1/16
These text requirements are for general use; however, special fonts and very thin letter forms may need to be made larger or thicker and will be approached on a case-by-case basis.
White is prone to discolor and cannot be used as the background or any part of the imprint area. The product's color palette offers three light colors to use in place of White: F5, N9 and N10. The background color of the imprint area should not be set to these light colors. It is difficult to keep the logo clean through the manufacturing process.

Mat Size Imprint Area
2.5' x 3' (29 x 34) 20 x 25
3' x 4' (34 x 45.5) 25 x 36
3' x 5' (34 x 54.5) 25 x 48
3' x 10' (34 x 111) 25 x 96
4' x 6' (45 x 67.5) 36 x 50
4' x 8' (45 x 95) 36 x 70
6' x 6' (71.5 x 72) 43 x 50
6' x 8' (71.5 x 96) 43 x 80

Rubber Scraper mats can be commercially laundered (see laundering instructions) or cleaned using the instructions below.
Scrub with a deck brush (when needed) using detergent with a neutral pH.
Rinse with a hose or pressure washer.
Lay flat or hang to dry.